When choosing winter municipal machines to meet the needs of municipal companies and agricultural farms, you must take the following into account:
- machine park owned by the client (e.g., tractor and its equipment),
- type of land (pavement, residential street, public road, parking lot, square, etc.),
- landform,
- type of surface (asphalt, cobblestones, gravel, etc.),
- climate in the region where the machine will be used.
When choosing summer municipal machinery to the needs of municipal companies and agricultural farms, you must take the following into account:
- machine park owned by the client (e.g., tractor and its equipment),
- surface,
- type of vegetation (e.g., grass, bushes, trees),
- landform,
- type of land (e.g., lawns, meadows, roadsides, ditches)
When choosing forage machines (mowers, tedders, rakes) to the needs of a farm, you must take the following into account:
- machine park owned by the client (tractor and its equipment),
- the area of grassland,
- type of vegetation in grasslands,
- landform.
The SaMASZ logo in JPG, PDF, PNG, AI, EPS formats can be downloaded via the link: (link do zakładki media)
We provide the Spare Parts Catalog in an electronic version at the customer’s request, sent to the following address: https://samasz.pl/katalogi/katalogi/ www.samasz.pl
The sale of SaMASZ parts is carried out throughout the country as part of a dealer network. We encourage you to purchase parts at your nearest SaMASZ dealer; it reduces the order completion period. Go to the list of authorized dealers> Spare parts for SaMASZ machines can also be purchased at the SaMASZ store at the company’s headquarters. Orders are accepted by phone: (908) 259-5860 or by e-mail to the following address: info@samasz.com
Angular gearboxes require Transol or Hipol transmission fluid.
| | |
Z 064 | 2,0 | Trensol 680, 1000 |
Z 064/3 | 2,0 | |
Z 010 | 2,5 | |
Z 010/1 | 3,5 | |
Z 010/2 | 4,5 | |
Z 010/3 (wer. spulchniacz) | 3,5 (~0,3 w przekładni spulchniacza) | |
Z 010/4 | 4,5 | |
K2BF and K4BF | 5,0 (~1,0 w przekładni kątowej) |
Model of the drum mower, amount of transmission fluid, type of transmission fluid, ripper version, in the ripper gearbox, in the angular gearbox
The specification of flail blades used in SaMASZ sp. z o.o flail mowers can be downloaded here.
One of the main reasons for the rapid wear of the slides is the mower’s inappropriate setting for operation. The guarantee of extended service life of the slide elements is their optimal ground pressure with the entire sliding surface and adequate relief of the working system.
The replacement of blades in the disc mower requires the use of a specially prepared wrench enclosed with each machine. The video instruction is available at:
The tank of the SaMASZ boom mower uses HYDRAULIC PREMIUM 46 HV fluid. The use of fluid with similar properties from the HLP group is allowed.
The amount of fluid in the disc mower is strictly defined depending on the size of the cutter bar, i.e.: Cutter bar length, fluid type, fluid quantity
The reason for the hindered operation of the disc mower after changing the fluid is usually exceeding the permissible amount of fluid. In the event of the above-mentioned symptoms, you must drain off all the fluid and fill it in accordance with the operator’s manual attached to the machine. The specified amount of fluid in the cutter bar is given in the answer to the question: How much oil should be used in the SaMASZ disc mower cutter bar?
Before checking the fluid level in the angle transmission, set the cutter bar horizontally on the ground.
The fluid level is checked by removing the control plug B on the side of the gearbox. If the fluid level is too low, add fluid to filler A until it appears in the control opening B. If the fluid is changed, drain it off by opening plug C.
An exemplary location of plugs in gears used in disc mowers is presented in the diagrams below.
Plug B is for checking the fluid level.
Plug C is used to drain off the fluid.
Draining off fluid from the SaMASZ cutter bar requires disassembly of the cutter bar closure by unscrewing the bolts according to the instructions below. The fluid should be drained off immediately after using the machine, when it is warm. To fill the cutter bar with fluid, use the opening closed with a plug (3/8” hex key) marked in green in the figure below. The specified amount of fluid in the cutter bar is given in the answer to the question: How much fluid should be used in the SaMASZ disc mower cutter bar.
The warranty period for SaMASZ machines is:
- disc mowers - 24 months
- drum mowers - 24 months
- tedders and rakes - 24 months
- flail mowers - 12 months
- snow plows - 12 months
- spreaders and sweepers - 12 months
Yes. SaMASZ machinery can be repaired through a dealer or by reporting a failure directly to the SaMASZ Service Center. The service request should be sent to the following address: you can also call us at: or use the interactive form on the website ...
The service request should be sent to the following address: … you can also call us at: … or use the interactive form on the website: ….
We provide the User Manuals in an electronic version at the customer’s request, sent to: …