KDF – front mowers
KDF front disc mowers could be a perfect alternative for rear mowers due to good visibility during operation and transport. Extended frame and coil springs of long travel enable very good ground following and proper ground pressure.
- stepless adjustment of cutting height
- use of topping skids or double topping skids possible
- perfect ground following also on uneven and steep terrain
- eliminates tedding thanks to application of conditioners
- hydraulic transport and headlands lifting
- mechanical transport latch
- work with forage collecting machines (self-collecting trailers, balers) possible
- foldable side guards for comfort transport
- change of PTO direction of rotation possible by reversing main gearbox - work with tractors
with clockwise or counter-clockwise PTO rotation
- low operating costs
- most of maintenance works can be done on operator’s own
- over 25 years of experience in disc mowers manufacturing
- own design of PerfectCUT cutterbar tested worldwide
- 2-year warranty
- more than 5 000 KDF mowers working on fields across the world
| KDF 260 | KDF 300 | KDF 340 | KDF 390 FOR TRACTOR | KDF 390 FORTCHRITT | KDF 301 S | KDF 341 S | KDF 341 W | KDF 301 W | ||
|---|---|---|---|---|---|---|---|---|---|---|
| Working width | [m/ft] | 2,60 / 8’7” | 3,00 / 9’10” | 3,40 / 11’2” | 3,90 / 12’1” | 3,90 / 12’1” | 3,00 / 9’10” | 3,40 / 11’2” | 3,40 / 11'2" | 3,00 / 9’10” |
| Transport width | [m/ft] | 2,60 / 8’7” | 3,00 / 9’10” | 3,40 / 11’2” | 3,80 / 12’8” | 3,80 / 12’8” | 3,00 / 9’10” | 3,40 / 11’2” | 3,40 / 11'2" | 3,00 / 9’10” |
| Swath width | [m/ft] | ~ 01,00 -1,20 / ~ 2’11” - 3’7” | ~ 1,30 - 1,50 / ~ 4’4” - 4’11” | ~ 1,40 -1,80 / ~ 4’7” - 5’11” | ~ 1,40 - 2,30 / ~ 4’7’’ - 7’2’’ | ~ 1,40 - 2,30 / ~ 5’3” - 7’7" | ~ 1,20 - 2,00 / ~ 4’11” - 6’7” | ~ 1,40 - 2,40 / ~ 6’3’’ - 7’11” | ~ 1,30 - 2,10 / ~ 4’11’’ - 6’11 | ~ 1,10 - 1,70 / ~ 3’7” - 5’7” |
| Necessary hydraulic couplers | 1 x single acting | 1 x single acting | 1 x single acting | 1 x single acting | 1 x single acting | 1 x single acting | 1 x single acting | 1 x single acting | 1 x single acting | |
| Working capacity | [ha/h/ac/h] | ~ 2,80 / 7,00 | ~ 3,50 / 8,70 | ~ 4,00 / 10,00 | ~ 4,50 / 11,00 | ~ 3,00 / 7,50 | ~ 3,50 / 8,70 | ~ 4,00 / 10,00 | ~ 4,00 / 10,00 | ~ 3,50 / 8,70 |
| Number of discs | [pcs.] | 6 | 7 | 8 | 9 | 9 | 7 | 8 | 8 | 7 |
| Number of knives | [pcs.] | 12 | 14 | 16 | 18 | 18 | 14 | 16 | 16 | 14 |
| RPM | 1000 | 1000 | 1000 | 1000 | 1000 | 1000 | 1000 | 1000 | 1000 | |
| 3-point hitch cat. | II | II | II | II | II | II | II | II | II | |
| Power demand | [HP] | from 70 | from 80 | from 90 | from 110 | from 82 | from 100 | from 110 | from 100 | from 100 |
| Weight | [kg/lbs] | 890 / 1960 | 940 / 2075 | 1020 / 2250 | 1065 / 2335 | 820 / 1810 | 1260 / 2775 | 1340 / 2955 | 1475 / 3250 | 1360 / 3000 |
| PTO shaft | tractor - mower: with friction clutch built in: with overrunning clutch | tractor - mower: with friction clutch built in: with overrunning clutch | tractor - mower: with friction clutch built in: with overrunning clutch | tractor-mower: with friction clutch built-in: with overrunning clutch | tractor - mower: with overrunning friction clutch | tractor - mower: with friction clutch, built-in: 1. with overload clutch, 2. with overrunning clutch | tractor - mower: with friction clutch, built-in: 1. with overload clutch, 2. with overrunning clutch | tractor - mower: with friction clutch, built-in: 1. with overload clutch, 2. with overrunning clutch | tractor - mower: with friction clutch, built-in: 1. with overload clutch, 2. with overrunning clutch | |
| Single rubber swath guide | [pcs.] | 2 | 2 | - | - | - | Metal swath guides in conditioner | Metal swath guides in conditioner | Metal swath guides in conditioner | Metal swath guides in conditioner |
| Double rubber swath guide | [pcs.] | - | - | 2 | 2 | 2 | - | - | - | - |
Due to the strategy of constant development, SaMASZ reserves the right to change technical data at any time and without any notice. All operational data and graphical materials found at our website are for reference only. Some of the equipment items are optional and not included in the standard equipment. For more details concerning warranty, safety and products, please contact your local SaMASZ dealer.
List of dealers:
United States
Canada
Standard equipment
LiteCUT cutterbar with quick knife replacement system • SafeGEAR system • Hardened slides • Wearing plates on sliding skids • Hydraulic cylinders • Support springs • Stepless regulation of working height • Swath width regulation • PTO shaft • Additional knives and knife mounting lever • Front mounting triangle • Mechanical lock for transport (not applicable KDF 390 FORTSCHRITT)
Additional equipment
- Standard equipment
- Optional
- —Option not available
| KDF 260 | KDF 300 | KDF 340 | KDF 390 FOR TRACTOR | KDF 390 FORTCHRITT | KDF 301 S | KDF 341 S | KDF 341 W | KDF 301 W | ||
|---|---|---|---|---|---|---|---|---|---|---|
| Cutting disc with instep | [set] | |||||||||
| Topping plates/ Double topping plates | [set] | |||||||||
| Side shift adapter | — | — | ||||||||
| Side shift cylinder | — | — | ||||||||
| Warning plates | [set] | — | — | — | — | |||||
| Wooden transport crate | — | — | — | — | — | — | ||||
| Rubber swath guide - single | [pcs.] | — | — | — | — | — | — | |||
| Rubber swath guide - double (inner) | — | — | — | — | — | — | — | — | ||
| Extended swath guides | [set] | — | — | — | — | — | — | |||
| Warning plates | [set] | — | — | — | — | — | — | — | ||
| Rubber swath guide - double (outer) | — | — | — | — | — | — | — | — | ||
| Rubber swath guide - double | [pcs.] | — | — | — | — | — | — | — | — | |
Catalogs
